Latest activity
Live updates
-
Pls replied to the thread Red Highland Z3 1.9 Roadster.It seemed to work ok, and when it had cured, I applied Lanoguard. I need to get the car on the ramp and have a look to see how it has... -
Lee replied to the thread Thicker Sway Bars.We fitted a set recently. #ZedShed - MuttyMax’s Boston Green 2.8TU | BMW Z1 Z4 Z8 Z3 Forum and Technical Database - ZRoadster.org -
Synclare replied to the thread Red Highland Z3 1.9 Roadster.Out of curiosity how did you rate the Neutrarust on the diff (and whatever other vehicles you used it on) It is supposed to be painted... -
Cc.smith replied to the thread Thicker Sway Bars.Have you got a picture of what it looks like? I assume it's fit together with a nut and bolt right?
-
Lee replied to the thread Thicker Sway Bars.The front is very simple as the drop links are bolt on, so you can fit the bar and then the new links/old links. The rear is a whole...
-
Cc.smith replied to the thread Thicker Sway Bars.In terms of connecting the end of the aftermarket anti roll bar, how would you go about doing it? Because the OEM system is a pin into...
-
-
Pingu replied to the thread Thicker Sway Bars.I've done it to two cars. One is my M roadster, which now has an M Coupe rear anti-roll bar - no great problems. The other was when I... -
Lee replied to the thread Thicker Sway Bars.Strongly recommend these for the Z3, they do lean alot I would fit those bars with normal rubber bushes so you do still have a bit of...
-
Hwk-I-St8 replied to the thread Roof Tension Cables ?.I see that they have long side and short side cables. Would I need both? I know my tension cable(s?) broke as there's a spring hanging... -
Hwk-I-St8 replied to the thread Roof Tension Cables ?.Absolutely, I'll hook you up
-
Cc.smith replied to the thread Thicker Sway Bars.Will I need those for both front and back?
-
Smudgemanuk replied to the thread Thicker Sway Bars.These things that secure the D bushes on the anti roll bar to the chassis -
-
Cc.smith replied to the thread Thicker Sway Bars.I've actually recently replaced the front control arms along with drop links, but I will buy some rear replacements as well, what do you...
-
Smudgemanuk replied to the thread Thicker Sway Bars.I replaced the D bushes and drop links on mine recently, so I pretty much had the anti roll bar off. It is not that tricky to do but I...
-
CDoes anyone have experience of fitting this uprated Sway bar kit? I have a 2000 Z3 Roadster 2.8 preface lift, and I'm looking for less...
-
