Latest activity
Live updates
-
Andrew Kaccouris replied to the thread Electric Seat issue Z3 2001.Ok, thanks, will give it a shot 👍 -
DDave in Southampton replied to the thread Rebody Roof and Windscreen issue.Hi Mittaw I see you have the Grassbank rear windscreen. Why did you go with that, rather than the MGB GT option, which apparently fits...
-
Grumps replied to the thread Electric Seat issue Z3 2001.I believe they can stick through lack of use. Maybe try a bit of silicone spray or similar in the runners to start with before you start... -
DDave in Southampton replied to the thread Rebody Roof and Windscreen issue.Hi
-
Hi all, Having an issue with drivers forwards/backwards movement. My son who well over 6ft wanted to take the Z3 topless for a drive...
-
ExMX5owner replied to the thread Tools, Lets see em..I had a set of those once designed the same way as the grips I mentioned earlier in the thread, someone liked them more than I did. :(... -
ExMX5owner replied to the thread Tools, Lets see em..My toolbox is ordered in a top down methodology. Up the top there is a code reader and multi-tester and other touchy feely tools and...
-
deano1712 replied to the thread Wanted Hamann Hardtop WTB.Have you enquired direct with Hamann? I bough one new ~12 years ago and it was made to order. So if they still have the tooling you may... -
AntStark replied to the thread Tools, Lets see em..This is the tool I use the most 🫤 If it unscrews..I am going to drop it -
-
Duncodin replied to the thread Tools, Lets see em..No. Not the angle grinder. I mean the cardboard. It's wonderful stuff. But of course you do need a decent angle grinder to turn above... -
-
Pingu replied to the thread Thicker Sway Bars.If you have 245s on the front, what's on the rear? You could have found your problem. The M Roadster was designed to be ballanced with... -
Pingu replied to the thread Tools, Lets see em..The most useful tools I have are tools that allow me to make other tools. Everyone who does DIY mechanicking should have access to a...
-
Toby replied to the thread Tools, Lets see em.. -
-
Duncodin replied to the thread Tools, Lets see em..
-
-
Pond replied to the thread Tools, Lets see em..A gurt big hammer is usually what I want to use after a few minutes with anything!
