Seat Connector

Chamber66

Dedicated Member
British Zeds
Joined
Oct 4, 2023
Points
41
Location
Swansea
Model of Z
Z3 2.8
Changing out my drivers seat but can't figure out where these go. One just see.s like a bla know end but what about the bigger yellow one?
Pictures would help 😆
 

Attachments

  • IMG-20250811-WA0049.webp
    IMG-20250811-WA0049.webp
    44.7 KB · Views: 201
  • IMG-20250811-WA0047.webp
    IMG-20250811-WA0047.webp
    33.7 KB · Views: 200
  • IMG-20250811-WA0048.webp
    IMG-20250811-WA0048.webp
    62 KB · Views: 200
That looks like the one that sits on the seat belt buckle holder for the restraint explosive.
 
Hi yes this is still. Connected. But where does the other end connect to, I dont appear to have anything it fits?
The other end goes into the large connector from the seat loom, which in turn connects to the connector from the car from under the carpet.
The large connector on the seat has three smaller connectors 'plugged' into it; that one, the power for the seat motors and the heating connector.
If that makes sense!
 
The other end goes into the large connector from the seat loom, which in turn connects to the connector from the car from under the carpet.
The large connector on the seat has three smaller connectors 'plugged' into it; that one, the power for the seat motors and the heating connector.
If that makes sense!
I've searched high and low and can't see where it connects. Do you have a picture?
 
Back
Top