Valentines Day Card

andyglym

andyglym

Shiny Dust Caps Make Your Zed Go Faster.
Supporter
British Zeds
Joined
Feb 20, 2015
Points
266
Location
Moresby, West Cumbria, England
Model of Z
2.8 Roadster
Okay so I went via the Hardknott Pass to get it. The sun was almost out and it almost didn't rain but roof down and off into the wilderness.

Last stop for the L'all Ratty narrow gauge steam train railway from Ravensglass. Two nice pubs in walking distance, which is nice.
DSCN0675.webp

DSCN0677.webp

DSCN0678.webp

DSCN0680.webp

DSCN0681.webp

DSCN0683.webp

DSCN0687.webp

DSCN0688.webp

I can confirm my Traction Control Works.
 
Andy McDonnell said:
Okay so I went via the Hardknott Pass to get it. The sun was almost out and it almost didn't rain but roof down and off into the wilderness.

Last stop for the L'all Ratty narrow gauge steam train railway from Ravensglass. Two nice pubs in walking distance, which is nice.
View attachment 26985
View attachment 26986
View attachment 26987
View attachment 26988
View attachment 26989
View attachment 26990
View attachment 26991
View attachment 26992
I can confirm my Traction Control Works.
Click to expand...
Nice collection of photo's there Andy. I should make the railway when I'm up there
 
Redline said:
You know its one of these expensive premium rate numbers don't you.....

Great pics - wish I was up there....
Click to expand...
Not an 0898 number those are expensive. Well so my mate tells me. LoL
 
Unless their as all bills :p
In the envelopes :)
 
I expect he will go to the shop tonight :p
As I'm at work in half hour ...........;)
Better go and get ready ;)
 
Mission accomplished and a great day out to boot. My zed is in the garage this weekend on axle stands as the diff bush has gone just a bit too far and the diff dropped a tad. Hoped to get it resolved with out the whole a**e end out and have done.It was in a bad way it virtually fell out with a small screwdriver for assistance it didn't take much pursuading thats for sure. New one will arrive on Monday and i can bolt it all back together another job done.
 
Antm72 said:
Mission accomplished and a great day out to boot. My zed is in the garage this weekend on axle stands as the diff bush has gone just a bit too far and the diff dropped a tad. Hoped to get it resolved with out the whole a**e end out and have done.It was in a bad way it virtually fell out with a small screwdriver for assistance it didn't take much pursuading thats for sure. New one will arrive on Monday and i can bolt it all back together another job done.
Click to expand...
That's not good mate, sure you'll have it sorted in no time.:thumbsup:
 
Its all stripped out Andy just the new bush to fit but have all the clearences i need so it should be striaght forward :thumbsup: Been a job thats looked on the cards for a while and wasn't sure if i would be able to do it simply but it appears you can.
 
You must log in or register to reply here.
Back
Top